Granite memorial shrine dimensions should not be selected from one fixed number for every family memorial. A better approach is to establish the main axis, plot width, number of graves, front setback and the proportion of the shrine relative to the overall memorial complex before finalizing drawings.
Which granite memorial shrine dimensions need to be measured?
Before discussing exact numbers, confirm three main dimensions: overall width, overall depth and total height. The roof, base, columns, projections and front clearance also need to be included.
- Plot width and the main shrine axis.
- Setback between the shrine and the nearest grave row.
- Central and side circulation widths.
- Height of fences, gates and adjacent memorial structures.
- Roof projection so it does not intrude into paths or neighboring plots.
How should the shrine be proportioned to the memorial complex?
The shrine should be visually clear on the main axis without consuming so much space that circulation and offering areas become uncomfortable. On smaller plots, a compact shrine with fewer roof layers and moderate depth is often more practical. Larger sites can support greater width and height, but the shrine should still remain proportionate to the gate, fence and grave group.
For related planning, see KANNO granite memorial shrine guide and family memorial layout guidance.
Should Lo Ban ruler references determine the final dimensions?
Some Vietnamese families use Lo Ban ruler measurements as a cultural reference. They can be reviewed after the technical dimensions are already practical. Traditional number selection does not replace checks for structure, circulation, plot boundaries or cemetery rules.
Seven steps to finalize granite memorial shrine dimensions
- Measure the entire site and establish the main centerline.
- Confirm the current number of graves and any future reserve positions.
- Set the circulation width and front offering space.
- Select the shrine form: compact, single-roof, multi-roof or another approved design.
- Develop the elevation to review height proportions.
- Check roof overhang, columns and base before fixing overall dimensions.
- Only then review traditional measurement references if the family requests them.
Common mistakes when choosing shrine size
- Selecting dimensions before measuring the actual plot.
- Calculating only the shrine body and forgetting roof projection.
- Oversizing the shrine so circulation in front of the graves becomes too narrow.
- Using a height that overwhelms the gate and fence.
- Failing to reserve space for possible future grave positions.
Checklist before approving granite memorial shrine dimensions
Review both the plan and elevation before approval. The plan should clearly show the plot boundary, shrine centerline, setbacks, paths and grave positions. The elevation should show base height, body height, roof height and the relationship with gates or fences. Both drawings must use the same dimension set.
- Recheck overall site dimensions on location.
- Confirm the roof does not cross a boundary or narrow a path.
- Check that the front offering space suits actual family use.
- Confirm finished ground levels and the height relationship to the graves.
- Finalize technical dimensions before checking traditional favorable-number ranges.
FAQ – Frequently Asked Questions
No. Dimensions should be developed from the actual plot, number of graves, circulation, project proportions and shrine type.
Yes. Boundary and clearance checks must include the full roof projection beyond the column line.
Yes, if the shrine form is kept compact and its depth, height and setbacks are controlled carefully.
They may be referenced as a cultural preference after the technical and spatial dimensions have already been confirmed.
Review your memorial shrine drawings with KANNO
Send KANNO the site plan, overall dimensions and expected number of graves for a proportion review before fabrication. See granite memorial design, KANNO projects or contact KANNO Vietnam. Hotline/Zalo: 098 765 6530.
